NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AP-3530
Model AP-3530 3300-3800MHz 30 dBi. Gain Download Datasheet Download Manual Post Enquiry

Grid Parabolic Antenna

Design Features: The AP-3530 microwave grid parabolic antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and is consists of full Parabolic reflector having a diameter of 1.2 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made high quality aluminum alloy to avoid any dissimilar materials. The rim and supporting arc are welded with argon welding technique to provide smooth finish and strong joints. Each grid member of the antenna is riveted at four points using pneumatic riveter. All the screws, nuts, bolts and mounting hardware of grid parabolic antenna are made of type 316 marine grade stainless steel.

Tracking Mechanism: The AP-3530 microwave grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range 3300-3800 MHz
Gain 30 dBi.
Bandwidth 500 MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 5 Degrees
Front to Back Ratio 26 dB.
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Diameter of Parabolic Reflector 1.2 Meters
Reflector Grid Material Aluminum Tube 1/2 Inch
Support & Rim Material Aluminum Tube 1 Inch
Maximum Mount Pipe Diameter 50mm - 76mm (2-3 Inches)
Gross Weight 18 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Grid Parabolic Antenna

Model Frequency Gain Download PDF ENQ
AP-3530 3300-3800MHz 30 dBi. Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AP-3530 microwave grid parabolic antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and is consists of full Parabolic reflector having a diameter of 1.2 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made high quality aluminum alloy to avoid any dissimilar materials. The rim and supporting arc are welded with argon welding technique to provide smooth finish and strong joints. Each grid member of the antenna is riveted at four points using pneumatic riveter. All the screws, nuts, bolts and mounting hardware of grid parabolic antenna are made of type 316 marine grade stainless steel.

Tracking Mechanism: The AP-3530 microwave grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range 3300-3800 MHz
Gain 30 dBi.
Bandwidth 500 MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 5 Degrees
Front to Back Ratio 26 dB.
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Diameter of Parabolic Reflector 1.2 Meters
Reflector Grid Material Aluminum Tube 1/2 Inch
Support & Rim Material Aluminum Tube 1 Inch
Maximum Mount Pipe Diameter 50mm - 76mm (2-3 Inches)
Gross Weight 18 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH