NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AC-380-512
Model AC-380-512 380-512MHz 3 dBi Gain Download Datasheet Download Manual Post Enquiry

High Gain TETRA Antenna

model, enclosed in a ABS radome, uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and does not require any field tuning or adjustments. The compact size (0.7Meter shipping length) of omni-directional TETRA antenna allows easy handling, shipping and highly suitable for receiving, transmitting of radio signals for TETRA radio without having the requirement of multiple antennas. The N-Female termination of antenna is fixed at the bottom of the mounting pipe for complete weather protection. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the antenna operation as well as providing an aesthetically pleasing appearance.

Constructions: This TETRA antenna is consisting of large diameter radiating elements stacked vertically and enclosed in ABS radome. The special “Choke and Spark Gap” technique is used for smooth VSWR and constant 3dBi. gain over the entire 380-512 MHz. frequency band. The UV resistant ABS enclosure has excellent transparency for RF signals and enough strength to withstand specified wind loads. The marine grade stainless steel mounting brackets and bird resistant cap is supplied with the antenna.

Electrical Specifications:
Frequency Range 380-512 MHz
Gain 3 dBi
Bandwidth Entire Band
Antenna Type Fiberglass
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1:2.0
RF Power Handling Capacity 500 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 600 mm
Shipping Length 700 mm
Support Pipe O.D. 52 mm
Support Pipe Material Aluminum Tube
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Length 450 mm
Gross Weight 4.5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain TETRA Antenna

Model Frequency Gain Download PDF ENQ
AC-380-512 380-512MHz 3 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

model, enclosed in a ABS radome, uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and does not require any field tuning or adjustments. The compact size (0.7Meter shipping length) of omni-directional TETRA antenna allows easy handling, shipping and highly suitable for receiving, transmitting of radio signals for TETRA radio without having the requirement of multiple antennas. The N-Female termination of antenna is fixed at the bottom of the mounting pipe for complete weather protection. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the antenna operation as well as providing an aesthetically pleasing appearance.

Constructions: This TETRA antenna is consisting of large diameter radiating elements stacked vertically and enclosed in ABS radome. The special “Choke and Spark Gap” technique is used for smooth VSWR and constant 3dBi. gain over the entire 380-512 MHz. frequency band. The UV resistant ABS enclosure has excellent transparency for RF signals and enough strength to withstand specified wind loads. The marine grade stainless steel mounting brackets and bird resistant cap is supplied with the antenna.

Electrical Specifications:
Frequency Range 380-512 MHz
Gain 3 dBi
Bandwidth Entire Band
Antenna Type Fiberglass
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1:2.0
RF Power Handling Capacity 500 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 600 mm
Shipping Length 700 mm
Support Pipe O.D. 52 mm
Support Pipe Material Aluminum Tube
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Length 450 mm
Gross Weight 4.5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH