NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AC12-840
Model AC12-840 806-870MHz 12.8 dBi Gain Download Datasheet Download Manual Post Enquiry

High Gain TETRA Antenna

Design Features: AC12-840 Fiberglass Omni-directional High Gain Tetra Band Collinear Antenna is rugged all weather model 6063T6 ultra corrosion resistant architectural aluminum, high class brass alloy and does not require any field tuning or adjustments. The antenna is supplied in two segments for easy of handling and shipping. The upper and lower portion of antenna is threaded together to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized radome to ensure survivability in the worst environments. The antenna termination is enclosed at bottom of the antenna for complete weather protection.

Constructions: The AC12-840 Fiberglass Omni-directional High Gain Tetra Band Collinear Antenna has center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special stub matching is used for smooth VSWR and constant 12dBi gain over the specified frequency band. The collinear antenna consist of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass tube. The mounting hardware is made of type 316 marine grade stainless steel and supplied with the antenna. AC12-840 high gain fiber glass collinear antenna is suitable for side mounting on the tower and is supplied with mounting hardware, including a non metallic 1.2 Meters (4 feet) long horizontal arm to hold the fiberglass omni-directional antenna at the top.

Electrical Specifications:
Frequency Range 806-870 MHz
Gain 12.8 dBi
Bandwidth 806-870MHz
Antenna Type Fiberglass
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 200 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminum, Brass & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 KMPH
Overall Length 4 Meters
Shipping Length 2.2 Meters
Support Pipe O.D. 52 mm
Support Pipe Material Aluminum Tube
Housing Material Fiber Glass
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Outer Diameter 45 mm
Radiating Elements - Material High Quality Brass
Gross Weight 8 Kgs. (Antenna Only)

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain TETRA Antenna

Model Frequency Gain Download PDF ENQ
AC12-840 806-870MHz 12.8 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: AC12-840 Fiberglass Omni-directional High Gain Tetra Band Collinear Antenna is rugged all weather model 6063T6 ultra corrosion resistant architectural aluminum, high class brass alloy and does not require any field tuning or adjustments. The antenna is supplied in two segments for easy of handling and shipping. The upper and lower portion of antenna is threaded together to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized radome to ensure survivability in the worst environments. The antenna termination is enclosed at bottom of the antenna for complete weather protection.

Constructions: The AC12-840 Fiberglass Omni-directional High Gain Tetra Band Collinear Antenna has center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special stub matching is used for smooth VSWR and constant 12dBi gain over the specified frequency band. The collinear antenna consist of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass tube. The mounting hardware is made of type 316 marine grade stainless steel and supplied with the antenna. AC12-840 high gain fiber glass collinear antenna is suitable for side mounting on the tower and is supplied with mounting hardware, including a non metallic 1.2 Meters (4 feet) long horizontal arm to hold the fiberglass omni-directional antenna at the top.

Electrical Specifications:
Frequency Range 806-870 MHz
Gain 12.8 dBi
Bandwidth 806-870MHz
Antenna Type Fiberglass
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 200 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminum, Brass & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 KMPH
Overall Length 4 Meters
Shipping Length 2.2 Meters
Support Pipe O.D. 52 mm
Support Pipe Material Aluminum Tube
Housing Material Fiber Glass
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Outer Diameter 45 mm
Radiating Elements - Material High Quality Brass
Gross Weight 8 Kgs. (Antenna Only)

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH